Applied-motion STM23Q-2RE Manual de usuario descargar pdf (Pagina 2)

Step 3

If you have any questions or comments, please call Applied Motion Products Customer Support:

(800) 525-1609, or visit us online at www.applied-motion.com.

404 Westridge Dr.

Watsonville, CA 95076

Tel: 800-525-1609

Fax: 831-761 -6544

www.applied-motion.com

a) Apply power to the drive. The drive model and rmware revision should be

automatically displayed. If they are not, check the com port setting.

b) Follow the conguration instructions in the ST Congurator™ help screens.

The ST Congurator™ software can be used to set up your drive to operate in

several different modes including: Pulse & Direction, Analog Velocity,

and SCL.

c) ST Congurator™ includes a self test option (under the Drive menu) to

verify that the STM and power supply are correctly wired and congured.

920-0020 E

STM23/24 Quick Setup Guide

Recommended RS-485 Adapter

USB-COMi-M (P/N 8500-003)

▪ Available from Applied Motion Products

▪ Converts RS-422 and RS-485 to USB

For four wire RS-485, set SW2 to OFF and SW1,3,4 to ON.

On the USB-COMi-M screw terminal connector:

▪ Connect pin 1 to RX-

▪ Connect pin 2 to RX+

▪ Connect pin 3 to TX+

▪ Connect pin 4 to TX-

▪ Connect pin 6 to GND

▪ The DB-9 connector is not used.

Remove the two screws on the sides of the unit, then

remove the outer cover.

▪ For RS-485 operation, ensure that the row of colored pin

jumpers are installed.

2 3 4

4 Wire

RS-485

1 2

Sin comentarios

Applied-motion STM23Q-2RE Manual de usuario Pagina 2