Applied-motion TSM23P-2AG Manual de usuario descargar pdf (Pagina 19)

Rev. A

920-0083

TSM23P Hardware Manual

4 Troubleshooting

4.1 LED Error Codes

The TSM23P uses red and green LEDs to indicate status. When the motor is enabled, the green

LED ashes slowly. When the green LED is solid, the motor is disabled. Errors are indicated by

combinations of red and green ashes as shown below. This feature can be disabled for certain

warnings but not for alarms. See software manual for information on how to do this and which

warnings may be masked.

Code Error

solid green motor disabled

ashing green motor enabled

1 red, 1 green position limit

1 red, 2 green drive disabled

2 red, 1 green ccw limit

2 red, 2 green cw limit

3 red, 1 green over temperature

3 red, 2 green internal voltage

3 red, 3 green non-volatile memory error

4 red, 1 green over voltage

4 red, 2 green under voltage

4 red, 3 green non-volatile double error

5 red, 1 green over current

5 red, 2 green current limit

6 red, 1 green open winding

6 red, 2 green encoder failure

7 red, 1 green communication error

7 red, 2 green save failed

1 2 ... 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Applied-motion TSM23P-2AG Manual de usuario Pagina 19