Applied-motion BLuAC5-Si Manual de usuario descargar pdf (Pagina 10)

BLuAC5-Si Hardware Manual

920-0035E

12/10/2014

Connecting to the PC using RS-232

•Locateyourcomputerwithin6feetoftheBLUservodrive.

•Yourdrivewasshippedwithacommunicationcable.Plugthelargeendintotheserialport

of your PC and the small end into the RS-232 jack on your drive. Secure the adapter to the

PC with the screws on the sides.

Never connect a BLU servo drive to a telephone circuit. It uses the same connectors and cords as

telephones and modems, but the voltages are not compatible.

If your PC does not have a serial port, you should purchase a “USB Serial Converter”. We

have had good results with the Port Authority “USB Serial DB9” Adapter from CablesToGo.

com and with the SW1301 from SewellDirect.com.

For laptops, a PCMCIA converter card is a good choice. Our applications engineers use the

SSP-100 from Sewell Direct.

Regeneration LED

This LED indicates when the drive is actively applying the regeneration clamp. The clamp is

the internal circuitry that shunts the DC bus to a power resistor. The power resistor can be

either internal or external. (See “Servo Drive Regeneration” in this manual for more details)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Sin comentarios

Applied-motion BLuAC5-Si Manual de usuario Pagina 10