Applied-motion SWM24IP-3EE Manual de usuario descargar pdf (Pagina 14)

Connecting to a Host Using Ethernet

is process requires three steps

• Physically connect the drive to your network (or directly to the PC)

• Set the drive’s IP address

• Set the appropriate networking properties on your PC.

Note: the following pages are an excerpt from the “eSCL Communication Reference Guide”. For more

information, please read the rest of the guide.

Addresses, Subnets, and Ports

Every device on an Ethernet network must have a unique IP address. In order for two devices to communicate

with each other, they must both be connected to the network and they must have IP addresses that are on the

same subnet. A subnet is a logical division of a larger network. Members of one subnet are generally not able

to communicate with members of another unless they are connected through special network equipment (e.g.

router). Subnets are dened by the choices of IP addresses and subnet masks.

If you want to know the IP address and subnet mask of your PC, select Start…All Programs…Accessories…Com-

mand Prompt. en type “ipcong” and press Enter. You should see something like this:

If your PC’s subnet mask is set to 255.255.255.0, a common seing known as a Class C subnet mask, then your

machine can only talk to another network device whose IP address matches yours in the rst three octets. (e

numbers between the dots in an IP address are called octets.) For example, if your PC is on a Class C subnet

and has an IP address of 192.168.0.20, it can talk to a device at 192.168.0.40, but not one at 192.168.1.40. If

you change your subnet mask to 255.255.0.0 (Class B) you can talk to any device whose rst two octets match

yours. Be sure to ask your system administrator before doing this. Your network may be segmented for a rea-

son.

Your drive’s IP Address is stored internally in nonvolatile memory. e factory default address is 10.10.10.10.

is address can be changed using our ST Congurator soware. See Edit IP Address Table under the Drive

menu.

SWM24 Hardware Manual

920-0068B

10/31/2013

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sin comentarios

Applied-motion SWM24IP-3EE Manual de usuario Pagina 14