Applied-motion SWM24IP-3EE Manual de usuario descargar pdf (Pagina 34)

LED Error Codes

Status LED SWM

e SWM24 drive+motor includes a red/green LED to indicate status. When the motor is enabled, the LED ashes green

slowly. When the green LED is solid, the motor is disabled.

Errors are indicated by combinations of red and green “ashes” as follows:

Code Error

solid green no alarm, motor disabled

flashing green no alarm, motor enabled

fast green Q program running

1 red, 1 green motor disabled after a stall condition occurred

1 red, 2 green move attempted while drive disabled

2 red, 1 green ccw limit

2 red, 2 green cw limit

3 red, 1 green drive overheating

3 red, 2 green internal voltage out of range

3 red, 3 green blank Q segment

4 red, 1 green power supply overvoltage

4 red, 2 green power supply undervoltage

4 red, 3 green flash memory backup error

5 red, 1 green over current / short circuit

5 red, 2 green I/O occupied

6 red, 1 green open motor winding

6 red, 2 green bad encoder signal

7 red, 1 green serial communication error

7 red, 2 green flash memory error

SWM24 Hardware Manual

920-0068B

10/31/2013

1 2 ... 29 30 31 32 33 34 35 36

Sin comentarios

Applied-motion SWM24IP-3EE Manual de usuario Pagina 34