Applied-motion SWM24IP-3EE Manual de usuario descargar pdf (Pagina 20)

Option 3: Use Two Network Interface Cards (NICs)

is technique allows you to keep your PC connected to your LAN, but keeps the drive o the LAN, preventing

possible IP conicts or excessive trac.

1. If you use a desktop PC and have a spare card slot, install a second NIC and connect it directly to the

drive using a CAT5 cable. You don’t need a special “crossover cable”; the drive will automatically de-

tect the direct connection and make the necessary physical layer changes.

2. If you use a laptop and only connect to your LAN using wireless networking, you can use the built-in

RJ45 Ethernet connection as your second NIC.

3. Set the IP address on the drive to “10.10.10.10”.

4. To set the IP address of the second NIC:

a. On Windows XP, right click on “My Network Places” and select properties.

b. On Windows 7, click Computer. Scroll down the le pane until you see “Network”. Right click and

select properties. Select “Change adapter seings”

5. You should see an icon for your newly instated NIC. Right click again and select properties.

a. Scroll down until you see “Internet Properties (TCP/IP)”. Select this item and click the Properties

buon.

b. On Windows 7 and Vista, look for “(TCP/IPv4)”

6. Select the option “Use the following IP address”. en enter the address “10.10.10.11”. is will give

your PC an IP address that is on the same subnet as the drive. Windows will know to direct any trac

intended for the drive’s IP address to this interface card.

7. Next, enter the subnet mask as “255.255.255.0”. Be sure to leave “Default gateway” blank. is will

prevent your PC from looking for a router on this subnet.

8. Because you are connected directly to the drive, anytime the drive is not powered on your PC will

annoy you with a small message bubble in the corner of your screen saying “e network cable is

unplugged.”

PC NIC1 NIC2 LAN DRIVE

SWM24 Hardware Manual

920-0068B

10/31/2013

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

Applied-motion SWM24IP-3EE Manual de usuario Pagina 20