Applied-motion SWM24IP-3EE Manual de usuario descargar pdf (Pagina 7)

Geing Started

is manual describes the use of four dierent drive models. What you need to know and what you must have depends

on the drive model. For all models, you’ll need the following:

• a 12 - 70 volt DC power supply. Please read the section entitled Choosing a Power Supply for help in choos-

ing the right power supply.

• a small at blade screwdriver for tightening the connectors (included).

• a personal computer running Microso Windows 98, 2000, NT, Me , XP, Vista or 7 (32 or 64 bit).

•

ST Congurator

™ and

Q Programmer

™ soware applications, available at www.applied-motion.com/prod-

ucts/soware.

• Mating cables are available from Applied Motion, see the Accessories section for part numbers)

If you’ve never used an SWM24 drive you’ll need to get familiar with the drive and the set up soware before you try to

deploy the system in your application. We strongly recommend the following:

1. For -Q drives, download and install the

ST Congurator

™ soware applications, available at www.applied-

motion.com/products/soware.

2. Launch the soware by clicking Start...Programs...Applied Motion...

3. Connect the drive to your PC using the programming cable.

4. Connect the drive to the power supply.

5. Apply power to the drive.

6. e soware will recognize your drive, display the model and rmware version and be ready for action.

Mounting the SWM24

As with any stepper motor the SWM24 must be mounted so as to provide maximum heat-sinking and air-ow. Keep

space around the Drive+Motor to allow convected air-ow.

• Never use your Drive+Motor in a space where there is no air ow or where other devices cause the sur-

rounding air to be more than 40°C.

• Always provide airow around the Drive+Motor .

SWM24 Hardware Manual

920-0068B

10/31/2013

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Sin comentarios

Applied-motion SWM24IP-3EE Manual de usuario Pagina 7